Specifications

P RO C E D U R E F O R I NS TA L L AT I O N (c o n t. )
STEP 11: Re-install the cover.
(REFER TO STEP 1)
STEP 10: Adjust the traveling distance
with the outside limit switch of each set.
STEP 9: Carry out all appro-
priate connections in the fol-
lowing pages of the manual to
power the unit. Then go to step
10.
STEP 8: Lock the operator by turning key - F - to the
vertical position while pushing or pulling on the gate
until you hear the key release click into place.
F
Outside
Switch
Inside
Switches
Outside
Switch
BACK TO TABLE OF CONTENTS