Owner`s manual

Inside

Property

Inside Property

SETTING TIMER

SET GATE OPENING DIRECTION

To use the automatic close for the gate system, the

timer should be switched to the “ON” position.

To use the push close command, the timer should

be switched to the “OFF” position.

Set Timer 3 to 60 seconds.

NOTE: If a secondary safety sensor device is NOT used when

the timer is ON, the gate WILL hit a vehicle obstructing the

gate path during the close cycle.

Gate Opens Inward

Gate Opens Outward

To reduce the risk of SERIOUS INJURY or DEATH:

Disconnect power BEFORE performing ANY adjustments.

Adjustments

The opening direction works the same on

the single or master/second control board.

The timer works the same on the single or master/second

control board.

CAUTION