Manualshelf

Owner`s manual

ManualsBrandsElite access systems ManualsGate OpenerMiracle-One
11121314151617181920
11
If using a gate crossbar, weld bar across all pickets. Do not weld the crossbar on
just a few pickets, or they could bend.
Make sure that the operator is mounted level or it will not function properly. An off-level installation may cause the gate or operator to
fail prematurely.
The Miracle-One™ can be mounted on top of
the gate frame.
Unscrew 4 screws on top of operator to remove cover. Release the mechanical lock by turning the key to the horizontal
position.
MOUNTING OPERATOR
NOTE: See page 7 for mounting limitations.