Specifications

FEATURES AND SPECIFICATIONSFEATURES AND SPECIFICATIONSF E A T U R E S A N D S P E C I F I C A T I O N S
All specifications have been written and verified with our best attention. We do not take responsibility for possible
errors or omissions. We reserve the right to introduce changes to the technological progress.
Front
Front
Top
Bottom
Side
Back
Side
Top
39.5"
10.5"
12.25"
5.25"
3.5"
5.75"
4"
Electrical Specifications
Running System -
Modular Board -
Sensor -
Timer -
Master/Slave -
Safety Loop Input -
Alarm Output -
Spike Suppressors -
Alternate Outputs -
Electronic Inputs -
Housing Finish -
Uses a Microcontroller with built-in “watchdog”
system.
Board uses LEDs to indicate all input and output
functions.
When the gate makes contact with an object while
opening or closing, the gate will reverse for 1 second
then go into neutral, so it can be pushed by hand.
Can be set from 3 to 60 seconds, or “push-
open/stop/close” operation.
Dictates synchronized movement between two gate
operators.
Anti-tailgating system uses a “stop only” method of
operation. Will not work as a commercial loop
system.
Can be interfaced with any home alarm system. Alarm
will sound if the gate is forced open manually.
Optional siren can be installed.
Protected by spike suppressors.
Sensor alarm, alarm system, and magnetic locks.
Any type of radio receiver, full-control system “push-
open/stop/close”, safety loop, photocell, telephone
entry, and key switch.
Weather proof.
Mechanical Specifications
Motor - 24V DC, 12 Amps.
Cycles - 100 / Day. (Consult factory for solar applications)
Shipping Weight: Single Unit: 58 lbs. - Master/Slave: 89 lbs
Torque - 600 lbs. of torque.
Finishing - Aluminum.
Capabilities - Maximum gate size 15' wide, 600 lbs.
Operator Travel Speed - 14 to 18 seconds 90° opening.
37