Specifications

PROCEDURE FOR INSTALLATION

Step 3: Position the Miracle 1 horizontally level on the closed gate, where desired. For strength purposes, the

front steel bracket must be attached in an area that can withstand heavy forces. Additional reinforcement steel

plates may be necessary for mounting.

Step 4: Position and level the operator brackets and reinforcement plates. (See next page). Tack weld brackets

and plates in position.

Step 1: Remove the 4 screws and lift the

operator cover off.

Step 2: Release the mechanical lock by turning the

key to the horizontal position.

If using a gate crossbar, weld bar across all pickets. Do not weld

the crossbar on a few pickets, or they will bend.

The Miracle 1 can be mounted on top

of the gate frame.

Important:

Tack weld the front steel

bracket at the top of the

crossbar, so the operator

will not hit the crossbar

when in motion.

Mounting Instructions