Spec Sheet

W121
OUTDOOR IN-GROUND LANDSCAPE LIGHTING
WELL LIGHT
PRODUCT DESCRIPTION
FINISHES: Antique Brass
LABELS: N/A
outdoor lighting well light that uses an MR16 lamp (not included).The socket is
mounted on an adjustable gimbal so the lamp angle can be adjusted. The cover
is thick die casting brass.
SPECIFICATIONS:
Material: Die Casting brass cover
Lead wire: 3’ SJTOW 2*16A(1.3MM2)
Glass or Lens: Clear Glass
light source(not included): MR16/Gu5.3 LED Lamp
Maximum Lamp Rating: 35W
INSTALLATION：
Dig a hole approximately 10" diameter by 8" deep. This allows
approximately 3" of pea gravel or sand to surround ABS housing.
Strip the two leads from luminaire pigtail wire. Using the wire
connectors (not included), connect the leads from the luminaire to
the main supply cable leads. Install luminaire in the hole and
backfill hole after installation with pea gravel or sand.
DIMENSIONS: D5" X H5.5"