Spec Sheet

P806
OUTDOOR LANDSCAPE LIGHTING
PATH LIGHT
PRODUCT DESCRIPTION
IMPORTAN: Only use citronella or other approved fuels in unit.
1.Unscrew the lid and remove the top shade and bottom shade from
the fuel can.Pour fuel in the fixture's fuel can.Replace bottom shade
and washer to the fuel can,screw the lid tightly before
lighting.Light fuel at wick.After extinguishing flame,let cool and
then put on top shade.
DIMENSIONS: D 8" X H 61"
LABELS: N/A
8" shade spinning brass path light with 3' lead wire, using G4 lamp (not
included) halogen.
Material: Spinning Brass
Lead wire: 3’ SPT-1W 18A
Glass or Lens: Clear Glass
light source(not included): G4 Bulb Halogen
Maximum Lamp Rating: 35W
SPECIFICATIONS:
FINISHES: Antique Brass
INSTALLATION：
1.Hammer the spike into ground. Clear away area in ground at
wire way slot in top of spike. Lay 12V cable into wire way slot and
screw luminaire into spike. Expose the socket by loosing the shade
connector from stem. Install the G4 lamp into the socketed-install
shade connector back to stem. Turn off power. Make wire
connections using approved wiring connection method (not
supplied).
HOW TO FILL THE FUEL: