Spec Sheet

CO29L
OUTDOOR LANDSCAPE LIGHTING
SPOT LIGHT
PRODUCT DESCRIPTION
Hammer the spike into ground. Clear away area in ground at wire way
slot in top of spike. Lay 12V cable into wire way slot and screw
luminaire into spike. Loose the Hood screw and Pull the Hood out.
Screw the top body and install the MR16 lamp into the socket. And then
install the top body and hood. Loose the thumb screws to get desired
angle, then tightening the thumb screw.
Die Casting brass spotlight includes spike and 3' of wire.
LABELS: N/A
FINISHES: Antique Brass
DIMENSIONS: D3" X H8.5"
SPECIFICATIONS:
Material: Die Casting brass
Lead wire: 3’ SPT1W-18
Glass or Lens: Clear lens
light source(not included): LED MR16 lamp
Maximum Lamp Rating: 20W
INSTALLATION：