User manual

Linux DVR System
10.7. Change of Setup Value of the Number of Simultaneous Users
This is the menu to set the number of users who can interface simultaneously with
ELiSS LD-1600 in EyeLinker (remote place). Basic setting is set to 06 persons.
① When cursor is moved to the ‘number of simultaneous users’ among network
setup menu, yellow light is lit. ▲/▼button among Direction Movement buttons is
used for the move of cursor.
② When ▶button among Direction Movement buttons is pressed, yellow light is lit
on the rim of setup window which shows present setup value on the right side of
concerned menu, and cursor appears in the first column.
05
05
③ When setting the number of simultaneous users setup, ▲
/▼button among Direction Movement buttons is used to
change the number. Pressing of ▲button increases
number and pressing of ▼button decreases the number.
⑤ Upon completion of the number of simultaneous users setup, present setup value
is stored by pressing ENTER button. The yellow light on the rim of setup window
goes out, and cursor also disappears.
05
LeadTech
９８