User manual

Linux DVR System
10.6. Change of Port Setup Value
This is the menu to setup Port No. of ELiSS LD-1600 when ‘DHCP’ is set to ‘Not use’.
Basic setup is set to 05005.
① When cursor is moved to Port among network setup menu, yellow light is lit. ▲/
▼button among Direction Movement buttons is used for the move of cursor.
② When ▶button among Direction Movement buttons is pressed, yellow light is lit
on the rim of setup window which shows present setup value on the right side of
concerned menu, and cursor appears in the first column.
③ When setting Port setup, ▲/▼button among Direction
Movement buttons is used to change the number.
Pressing of ▲button increases number and pressing of
▼button decreases the number
④ ◀/▶button among Direction Movement buttons is used
to move cursor. ◀button moves cursor to left direction
and ▶button moves cursor to right direction.
⑤ Upon completion of Port setup, present setup value is stored by pressing ENTER
button. The yellow light on the rim of setup window goes out, and cursor also
disappears.
LeadTech
９７