User manual

Linux DVR System
10.4. Change of Net Mask Setup Value
This is the menu to set up Net Mask of ELiSS LD-1600 when ‘DHCP setup’ is set to
‘Not use’. Basic setup is set to 255.255.255.000.
① When cursor is moved to Net Mask among network setup menu, yellow light is lit.
▲/▼button among Direction Movement buttons is used for the move of cursor.
② When ▶button among Direction Movement buttons is pressed, yellow light is lit
on the rim of setup window which shows present setup value on the right side of
concerned menu, and cursor appears in the first column.
③ When setting Net Mask setup, ▲/▼button among
Direction Movement buttons is used to change the
number. Pressing of ▲button increases number and
pressing of ▼button decreases the number.
④ ◀/▶button among Direction Movement buttons is used
to move cursor. ◀button moves cursor to left direction
and ▶button moves cursor to right direction.
⑤ Upon completion of Net Mask setup, present setup value is stored by pressing
ENTER button. The yellow light on the rim of setup window goes out, and cursor
also disappears.
LeadTech
９５