User manual

Linux DVR System
10.3. Change of IP Setup Value
This is the menu to personally setup IP of ELiSS LD-1600 when ‘DHCP Setup’ is set
for ‘Not use’. Basic setup is set to 192.168.000.098.
① When cursor is moved to IP among network setup menu, yellow light is lit. For
move of cursor, ▲/▼button among Direction Movement buttons on the front
side of ELiSS is used..
② When ▶button among Direction Movement buttons is pressed, yellow light is lit
on the rim of setup window which shows present setup value on the right side of
concerned menu, and cursor appears in the first column.
③ To change the number at the time of IP setup, ▲/▼button
among Direction Movement buttons is used. Pressing of
▲button increases number and pressing of ▼button
decreases the number.
④ ◀/▶button among Direction Movement buttons is used
to move cursor. ◀button moves cursor in the left
direction and ▶button moves cursor in the right
direction .
⑤ Upon completion of IP setup, present setup value is stored by pressing ENTER
button. The yellow light on the rim of setup window goes out, and cursor also
disappears.
LeadTech
９４