User manual

Linux DVR System
I . Matters to be Noted
Matters to be Noted
Turn off the power of EliSS LD-1600 without fail before the installation.
The persons other than professional installer should not open the cover of the case of
this product at their own discretion. When verifying internal part of this product for
system upgrade or repair of trouble, please ask to the place of purchase without fail.
When installing this product, maintain approximately 15cm of distance from other
nearby equipment.
Be careful not to apply impact or shaking when ELiSS LD-1600 is moved or in
operation.
Do not install at the place where there is strong magnetism or radio wave.
surface of wall for smooth radiation of heat. Be attentive no conductive material is put
inside the cooling ventilation hole.
Please avoid installing at the places of high temperature such as nearby direct
sunlight or heater.
Please avoid installing at the places where are extremely cold or highly humid.
Before connecting the power, check the using power of AC100~240V 50/60Hz without
fail.
This unit is designed for indoor use. Operating ambient temperature must not range
beyond (0℃~+40℃)
LeadTech
９