User manual

Linux DVR System

9.3. Method of Schedule Setup

When storage time is set up at storage menu of storage schedule and set the storage

status to ‘Schedule’, concerned camera does entire storage according to set schedule.

The user can identify the execution of entire storage by concerned camera by the

display of entire storage initial (R) on the screen. These setup values can be changed

at the user’s own discretion.

② When designation of camera for the change of schedule setup is completed, move

the cursor to schedule setup menu using ▶button among Direction Movement

buttons.

③ When pressing ▶button among Direction Movement buttons once again, cursor

moves to schedule setup window, and selection of storage status is possible by

each weekday and time band. When ENTER button is pressed moving the cursor

to each column using Direction Movement buttons, change of storage status is

possible in the order of ‘Entire storage→Motion storage→ No storage.

ⅰ) Schedule setup change of horizontal line (weekday)

When ENTER button is pressed after setting cursor to desired weekday, change of

setup during 24 hours of concerned weekday is possible at the same time. For every

pressing of ENTER button, setting is changed in the order of ‘Entire storage→Motion

storage→ No storage.

Position of cursor

LeadTech

８９