User manual

Linux DVR System
9.2. SETUP MODE – Designation of Camera at Schedule Setup Screen
① If you select and enter the initial screen of Storage
Schedule from initial screen of Setup Mode, cursor is
placed in No. 1 camera (CAM 01). The camera in which
cursor is placed shines with yellow light.
② To setup other camera, use ▲/▼button among Direction
Movement buttons. ▲button moves cursor upward and
▼button moves cursor downward
③ To change setup value of concerned camera after
selecting the camera, use ◀/▶button among Direction
Movement buttons. ◀button moves cursor to left side
and ▶button moves cursor to right side.
④ To change setup of concerned camera after designating camera, use ▶button.
When ▶button is pressed, cursor moves to ‘Schedule Setup’ among Storage
Schedule Menu. The menu on which cursor is located shines with yellow light
⑤ To select other camera from Storage Schedule Setup Menu, use ENTER button
or CANCEL button. ENTER button allows you to store all of the setup value of
present camera and go over to camera designation stage, and CANCEL button
allows you to go over to camera designation stage maintaining previous value
without storing the setup value of present camera.
LeadTech
８８