User manual

Linux DVR System
④ If cursor moves to Storage status, yellow light is lit on ‘Storage Status’.
⑤ When pressing ▶button among Direction Movement buttons, yellow light is lit on
the rid of setup window that shows present setup value of concerned menu.
⑥ Set the storage status of concerned camera to ‘Schedule’ using ▲/▼button
among Direction Movement buttons. Change is made in the order of Storage→
Schedule→ No storage on every pressing of ▼button. ▲button changes in the
order of No storage→ Schedule→ Storage.
⑦ When setting is completed, store present setup value of Storage Status by pressing
ENTER button. (At this time, when CANCEL button is pressed, present setup value
is not stored, and previous setup value is maintained.)
⑧ The user can set up the degree of strength of movement which enables storage if
the user moves the position of cursor to Motion Setup among Camera Setup
Menu by pressing ▼button. If ▶button is pressed, yellow light is lit on the rim of
setup window which shows present setup value on the right side of concerned
menu, and cursor appears in the first column. Motion sensitivity can be set from
1 to 10, and basic setting is set to 6.
⑨ When pressing ▶button and move the position of cursor to Motion Continuance
Time among Camera Setup Menu, user can set storage time when the moving
happens. Setting of time can be changed using ▲/▼button among Direction
Movement buttons.
LeadTech
７９