User manual

Linux DVR System
7. SETUP MODE – Motion Recording Setup
7.1. Motion Recording
Motion Storage starts the storage when the movement is sensed in the sphere after
designating a sphere on the screen.
User can know the execution of motion storage of concerned camera by the display of
motion storage initial (M) on the screen.
7.1.1. Execution of Motion Recording
If the execution of Motion Storage of concerned camera is intended, set the storage
status of camera at Camera Setup to ‘Schedule’, and set the schedule to Motion
Storage at Storage Schedule.
① SETUP MODE–Designate the camera to execute Motion
Storage at Camera Setup. When camera setup menu is
selected at initial menu screen of SETUP MODE, first
cursor is placed at No. 1 camera (CAM01) Yellow light is
lit on the camera on which cursor is positioned.
LeadTech
７８
③ When the user intends to store other camera , use ◀/▶
button among Direction Movement buttons. ◀button
moves the cursor to left side and ▶button moves the
cursor to right side.
② To change the set value of the designated camera after
designating the camera, use ▲/▼button among
Direction Movement buttons. Move cursor to Storing
Status among Camera Setup menu using ▼button .