User manual

Linux DVR System
6.2. Explanation of Color Setup Method
User can set each respective value of BRIGHTNESS / CONTRAST / SATURATION /
HUE of Capture screen and Overlay screen.
① After moving cursor to MENU, Capture and Overlay can be
selected using ◀/▶button among Direction Movement
buttons. Selected value is lit with yellow light.
② After selecting Capture and Overlay, select menu to change
the setting among BRIGHTNESS/CINTRAST/SATURATION/
HUE using ▼/▲button among Direction Movement
buttons. Selected value is lit with yellow light.
③ After selecting menu to change the setting among
BRIGHTNESS/CONTRAST/SATUATION/HUE, user can
change Setup Value by pressing ◀/▶button among
Direction Movement buttons. ◀button decreases the size
of value and ▶button increases the size of value.
④ Each Setup Value of BRIGHTNESS/CONTRAST/SATUATION/HUE is set in the
manner mentioned in ③ above.
⑤ When setup of all color value is completed, return to initial screen of Setup Menu
Selection after storing the Setup Value using ENTER button. If storage of Setup
Value is not desired, return to initial screen of Setup Menu Selection by pressing
CANCEL button. Then, previous Setup Value is maintained.
When the user presses CANCEL button from the top stage even if the user pressed
ENTER button from the lower stage, the new value set by the user is not stored and the
existing value is maintained
LeadTech
７７