User manual

Linux DVR System
5.11. Setup of Resolution
Resolution by each camera channel can be changed at the discretion of the user.
Since the resolution influences storage capacity, resolution may be set differently
depending on the importance of each camera channel. Basic setting is 320x240.
① Move cursor to Resolution among camera setup menu. ▲/▼button among
Direction Movement buttons is used for the move of cursor. ▲button moves
cursor to the upper menu and ▼button moves cursor to the lower menu.
② When pressing ▶button among Direction Movement buttons, yellow color light is
lit around the rim of setup window which shows present setup value at right side of
concerned menu.
③ To change the value, ▲/▼button among Direction Movement buttons is used. By
every pressing of ▼Button, the resolution changes. When ▲button is pressed the
value changes in the reverse direction.
④ When Setup of Resolution is completed, move cursor by pressing ENTER button.
Then, yellow color light around the rim of setup window goes out.
LeadTech
７４