User manual

Linux DVR System
5.10. Setup of Alarm
This is a menu to ring Alarm when movement in set sphere is sensed at Storage
Schedule of SETUP MODE. User can select one among 4 alarms. Basic setting is set
to OFF.
(Refer to p.104: 12. SETUP MODE-Alarm Setup.)
① Move cursor to Alarm among Camera Setup Menu. ▲/▼button among Direction
Movement buttons is used for the move of cursor. ▲button moves the cursor to
upper menu and ▼button moves the cursor to lower menu.
② When pressing ▶button among Direction Movement buttons, yellow color light is
lit around the rim of setup window which shows present setup value at right side
of concerned menu.
OFF
OFF
③ To change the value, ▲/▼button among Direction Movement buttons is used. At
every pressing of ▼Button, change is made in the order of OFF→ALARM 1→
ALARM 2→ALARM 3→ALARM 4. At every pressing of ▲button, change is made in
the order of OFF→ALARM 4→ALARM 3→ALARM 2→ALARM1.
Alarm
Alarm1
Alarm2
Alarm3
Alarm4
④ When Alarm Setup is completed, move cursor to Menu Selection window by
pressing ENTER button. Then, yellow light around Setup window is turned off.
LeadTech
７３