User manual

Linux DVR System
5.7. Setup of the Status of Recording
Status of recording can be set up by each camera. There are ‘Recording’, ‘No
Recording’, ‘Schedule’ in the status of recording. ‘Recording’ means intending entire
recording, ‘No Recording means not to store. ‘Schedule’ means to store as the
schedule set up in recording schedule of Setup Mode. Basic setup is set as
‘Recording’.
① Move cursor with Storage Status among Camera Setup Menu. For the move of
cursor, use ▲/▼button among Direction Movement buttons. ▲button moves
cursor to upper menu and ▼button moves cursor to lower menu.
② When ▶button among Direction Movement buttons is pressed, yellow color light
is lit around the rim of setup window which shows present setup value on the right
side of concerned menu.
③ To change the value, use ▲/▼button among Direction Movement buttons. At
every pressing of ▼Button, change is made in the order of Storage→Schedule→
No Storage. ▲button changes in the order of No storage→Schedule→Storage.
④ When setup of storage status is completed, move cursor to menu selection
window by pressing ENTER button. Then, yellow light around the rim of setup
window goes off.
LeadTech
６９