User manual

Linux DVR System
5.2. Setup Mode – Designation of Camera from Camera Setup Initial-Screen
④ When camera setting is completed, press ENTER button or CANCEL button. Then
it moves to other window which can designate other camera. At this time, if ENTER
button is pressed, setup value is applied, and if CANCEL button is pressed, it
maintains formerly stored value without applying setup value.
① When camera setup menu is selected from initial
menu screen of Setup Mode, first cursor is positioned
at No. 1 camera (CAM01). Yellow light is lit on the
camera where the cursor is positioned.
② When intended to designate other camera, ▲/▼button
among Direction Movement buttons is used. ▲button
moves the cursor upward. ▼button moves the cursor
downward.
③ To change setup value of concerned camera after
designating the camera, ◀/▶button among Direction
Movement buttons is used. ◀button moves the cursor
to the left side, and ▶button moves the cursor to the
right side.
LeadTech
６４