User manual

Linux DVR System
4.3. Changing Password
This is the menu for the change of password of manager. Basic setup is ‘0000’.
① Cursor is moved with password among general setup menu. Move cursor using ▲
/▼button among Direction Movement buttons. Concerned menu shines with
yellow light.
② When pressing ▶button among move buttons, the cursor appears in the first
column as yellow light is lit around the rim of the setup window that shows
present setup value in the right side of concerned menu.
③ Enter intended password using Camera Select button. When the digit of first
password is input with Camera Select button, cursor automatically moves 1
column backward. At this time, No. 10 button is recognized as 0’0 at the time of
password input.
④ When input is completed, move cursor to menu selection window by pressing
ENTER button. Then, blue light around the rim of setup window extinguished and
the cursor in setup window disappears.
⑤ Password and password reset value must be same. To verify correct input of
password value, password resetting must be done. Password resetting method is
same as password setting method as explained in the above.
******
LeadTech
５７