User manual

Linux DVR System
button, and to delete selected data, press button. If you press
button, it means that the user intends to select all data and backup.
ⓒ When button is pressed after selecting one data list, the digits of 00 05
10…55 appear in central message window (ⓒ). 00 means the data in the duration
of 0 ~ 5 minutes and 05 means the data in the duration of 5~10 minutes. User can
move to any column among 12 from 00 to 55 using ◀ , ▶ button, and when the
user press ENTERE button on the front side of ELiSS LD-1600 at desired column,
the floppy disk image which means ‘selected’ appears. If you press once more from
this status, ‘ㅡ’ shape image appears which means ‘not selected’. Plural number
of selection is possible in optional time band. If you press ▼ button after selecting
the time band, you can press ‘Confirmation’ or ‘Cancellation’ button. The case
when ‘Confirmation’ is not activated is the case when the capacity remained in USB
hard disk is not 5 times or more of selected capacity.
ⓓ Backup is progressed upon pressing ENTER button after selecting ‘yes’. When
data is moved to USB Hard disk, it is added to data list inside USB Hard disk.
When ENTER button is pressed at
‘Confirmation’ position, remaining
capacity inside USB Hard-disk and
capacity of data to backup is displayed,
and the window (left side) asking whether
or not to execute backup appears.
LeadTech
４７