User manual

Linux DVR System
3.2.6. Conversion of Camera Channel from Search Mode
This function is to watch camera channel which is not watched at present in 9-division
screen/4-division screen/Full screen mode. In order to convert camera seen on the screen,
use ▲/▼button among Direction Movement buttons in the same way as channel conversion.
▲button increases (+) camera channel and ▼button decreases (-) camera channel. (Refer
to p. The conversion of camera channel from Display Mode)
(1) Conversion of Camera Channel from 9-Division Screen Mode
For every 1 pressing of ▲button among Direction Movement buttons, camera channel
is converted in the order of CAM1~CAM9 channel screen→CAM8~CAM16 channel
screen→CAM1~CAM9 channel screen→…….
For every 1 pressing of ▼button among Direction Movement buttons, camera channel
is converted in the order of CAM1~CAM9 channel screen→CAM8~CAM16 channel
screen→CAM1~CAM9 channel screen→…….
(2) Conversion of Camera Channel from 4-Division Screen Mode
For every 1 pressing of ▲button among Direction Movement buttons, camera channel is
converted in the order of CAM1~CAM4 channel screen→CAM5~CAM8 channel
screen→CAM9~CAM12 channel screen→CAM13~CAM16 channel screen.
For every 1 pressing of ▼button among Direction Movement buttons, camera channel is
converted in the order of CAM1~CAM4 channel screen→CAM13~CAM16 channel
screen→CAM9~CAM12 channel screen→CAM5~CAM8 channel screen →…….
(3) Conversion of camera channel from Full Screen Mode
For every 1 pressing of ▲button, camera channel is converted in the order of CAM1
channel screen→CAM2 channel screen→CAM3 channel screen→……→CAM15
channel screen→CAM16 channel screen→CAM1 channel screen→CAM2 channel
screen→ .
For every 1 pressing of ▼button among Direction Movement buttons, camera channel
is converted in the order of CAM1 channel screen→CAM16 channel screen→CAM15
channel screen→……→CAM2 channel screen→CAM1 channel screen→CAM16
channel screen→CAM15 channel screen→……
Since all of 16CH are displayed on one screen in case of screen※ divided into 16, it is
meaningless to convert camera channel by pressing ▲/▼button among Direction
Movement buttons.
LeadTech
３３