User manual

Linux DVR System
3.2.2. Regeneration of Generally Searched Data
After selecting intended time/date, press ENTER button. Then conversion is made to the
screen that regeneration of actual data can be done.
3.2.3. Explanation of Data Regeneration Screen
① ② ③
① Indicates present mode. Present mode is SEARCH MODE.
② Sphere where recorded data of searched time/date is regenerated. To change the
division of screen, press DIV button located at front side of ELiSS. Division of screen is
changed by each 1 pressing.
③ ‘NO DATA’ message is shown in case of the camera channel with no recorded data at
searched time/date.
④ Time/date when the Image of the screen was taken is displayed.
⑤ Existence or none of recorded data by each camera channel is displayed as icon.
This icon means that concerned channel has recorded data at selected
time/date.
LeadTech
３０
This icon means that concerned channel has no recorded data at
selected time/date.