User manual

Linux DVR System
2.7.3. Conversion of Camera Channel from Screen Divided into 4
Firstly, set division of the screen to the screen divided into 4 by using DIV button. To convert
camera channel shown on the screen, use ▲/▼button among Direction Movement buttons in
case of ELiSS LD-1600. ▲button increases (+) camera channel and ▼button decreases (-)
camera channel..
① This is the direction in which camera channel is converted by every 1 pressing of
▲button among Direction Movement buttons from the screen divided into 4. (Converted
in the order of CAM1~CAM4 screen → CAM5~CAM8 screen → CAM9~CAM 12 →
CAM13~CAM 16 screen →…….)
② This is the direction in which camera channel is converted by every 1 pressing of
▼button among Direction Movement buttons from the screen divided into 4. (Converted
in the order of CAM1~CAM4 screen→ CAM13~CAM16 screen → CAM9~CAM12
screen → CAM5~CAM8 screen →…….)
1) Convert into screen divided into 4 by
pressing DIV button.
2) ▲button increases (+)
camera channel and
▼button decreases (-)
camera channel.
11 12
CAM9 10
3 4
CAM1 2
①
②
15 16
CAM13 14
15 16
CAM13 14
LeadTech
２５