User manual

Linux DVR System
③ Indication of Motion Sphere : When moving is sensed in the set area while in setup as
motion storage, sensed area is changed to blue color.
(Refer to Motion setup on p.68:
5.8..)
In camera setup, if Display of Motion Setup is set to OFF, no sphere indication is shown ※
on the screen.
2.3. Conversion to Display Mode from Other Mode
2.3.1. Conversion to Display Mode from Search Mode
If you press MODE button ( ) from Search Mode, conversion to DISPLAY MODE
로 is made.
2.3.2. Conversion to Display Mode from Setup Mode
When CANCEL button ( ) is pressed from initial menu screen of Setup Mode,
conversion to Display Mode is made.
2.3.3. Conversion to Display Mode from PTZ MODE
When ENTER / CANCEL button( / ) is pressed from PTZ Mode,
conversion to Display Mode is made..
LeadTech
２０