User manual

Linux DVR System
V . Name and Function of Each Part of ELiSS LD-1600
1. Name and Function of Each Part of Front Operating Panel
Name of Operating
Button
Function
① USB Port
- Terminal for USB connection
② 리모콘 센서 - 리모콘 신호를 수신하는 곳 입니다.
③ Camera Select
(01~16)
- When pressing the camera channel button desired among camera channel of 01~16 pieces,
then the concerned screen is shown in full screen.
- Used as number-entering key on password input (The number 10 channel button is
0 on password input)
④ Search
- Converts the screen into SEARCH MODE and DISPLAY MODE
⑤ SETUP
- Converts the screen into SETUP MODE
⑥ DIV
- Change division mode of the screen into 16 division→13 division→9 division→8 division→6
division→4 division→Full screen mode.
⑦ CANCEL
- Used when canceling setup contents.
⑧ PTZ
- Used when entering PAN/TILT Operation MODE.
⑨ BACKUP
- Used when entering BACKUP MODE.
⑩ ◀◀
- If you press this on retrieval of recorded data, reverse direction high-speed search is
executed.
⑪ ▶
- If you press this once, recorded data is regenerated. Pressing once more stops the screen
being regenerated temporarily.
⑫ ▶▶
- If you press this on regeneration of recorded data, right direction high-speed search is
executed. In case of during temporary stop. Move forward by one frame.
⑬ ■
- Converts MODE into DISPLAY MODE.
⑭ ●REC
- Executes total storage in DISPLAY MODE regardless of schedule.
⑮ ◀
- Moves the location of cursor to the left /- Search is made moving backward by 5 minutes in
Search Mode.
○
16
▶
- Moves the location of cursor to the right /- Search is made moving forward by 5 minutes in
Search Mode.
○
17
▲
- Moves up the location of cursor /- Used as CAMER CHANGE(+) button
○
18
▼
- Moves down the location of cursor /- Used as CAMER CHANGE(-) button
○
18
ENTER
- Used when selecting and storing value.
○
16
▶
- Turns ON/OFF ELiSS LD-1600.
LeadTech
１４