User manual

Linux DVR System
Problem
In VIEWER SET MODE, PAN/TILT, ZOOM/FOCUS of Pantilt camera is not
adjusted.
Answer 1
Verify if camera setup is set to PTZ camera. Verification can be done by
existence of PTZ camera initial ( P ).
Answer 2
If PAN/TILT, ZOOM/FOCUS is not adjusted while PTZ camera initial ( P )
is displayed on the screen, check PTZ Type and ID are set in correct
manner.
Problem
ZOOM IN/OUT, PAN/TILT of PAN/TILT camera is not adjusted in PANTILT
CONTROL MODE of ELiSS CENTER.
Answer 1
Verify if camera setup of ELiSS main body is set to PTZ camera.
Verification can be done by existence of PTZ camera initial ( P ).
Answer 2
If PAN/TILT, ZOOM/FOCUS is not adjusted while PTZ camera icon is
displayed on the screen of ELiSS main body, check if PTZ Type and ID is
correctly set.
Problem
ELiSS is operative. But, screen of specific camera channel is OFF or the
quality of image is poor.
Answer
Check if there is any problem with camera or camera adapter and
connection line.
Problem Sudden power off or no power input.
Answer Check if there is any problem with power cable or cable connection.
In case when a problem is not solved despite of the verification of above contents,
contact the installed company or our head office.
LeadTech Corp.
82-31-755-7850
82-31- 755-7851
[e-mail]
LeadTech
１２２