User manual

Linux DVR System
XI . Troubleshooting Guide
To shorten the time of problem solution, the user is requested to verify following
problem solution method in advance before judging as trouble.
LeadTech
１２１
Problem No storage. [Store icon ( ) is not displayed in concerned camera.]
Answer 1 Verify if video type is set to NTSC at camera setup.
Answer 2
Verify if camera store is set to ‘store’. Isn’t it set to ‘No storage’ or
‘Schedule’?
Answer 3
Adjust storage time of store schedule of SETUP MODE if store status is
set to Schedule.
Problem
Set to motion store at store schedule of SETUP MODE. But. Motion
storage is not executed. [Motion store icon ( ) is not displayed.
Answer 1
Check if ‘store status’ of camera intended to execute motion store is set
to schedule. (Refer to p.54)
Answer 2
If store icon ( ) is displayed while ‘store status’ of camera is set to
schedule, check if both ‘store’ and ‘motion store’ are set at MODE store
schedule.
(∵ ELiSS DVR executes Store preferentially when store and motion
store is overlapped) When ‘store’ is set to OFF, motion store is executed.
Answer 3 Check if Motion Sensitivity Setup is set too dull.
Problem Stored data are deleted.
Answer
Have you changed Date Setup in General Setup? ELiSS DVR deletes all
stored data when changing the date.