User manual

Linux DVR System
14.3. PTZ Camera Control Method
To control PTZ camera, PTZ camera must firstly be set up from SETUP MODE camera
setup. If you set PTZ camera and set OSD to ON in General Setup, Pan Tilt initial (P) is
shown on the left side of concerned screen at DISPLAY MODE. Control of PTZ camera
at PTZ CONTROL MODE is possible only when PTZ camera is actually connected and
concerned protocol is set up.
14.3.1. Control of PAN/TILT
① When ‘PAN/TILT’ menu is selected, yellow light
is lit, and other menus are displayed in black
color.
② When using ▲/▼/◀/▶button among Direction
Movement buttons located on the front side of
ELiSS LD-1600, PAN/TILT can be controlled as
the direction of button.
③ When pressing ENTER button once again, other
menu can be selected.
14.3.2. Control of ZOOM
① When ‘ZOOM’ menu is selected, yellow light is
lit, and other menus are displayed in black
color.
② When using ▲/▼button among Direction
Movement buttons located in the front side of
ELiSS LD-1600, ZOOM can be controlled.
③ When pressing ENTER button once again, other
menu can be selected again.
LeadTech
１１７