User manual

Linux DVR System
14.2. Selection of PTZ Control Mode Menu
When selecting the menu of PTZ CONTROL MODE, ▲/▼ button among Direction
Movement buttons located at front side of ELiSS LD-1600 is used for the move of
cursor. The menu on which cursor is located is lit with yellow light. ENTER button is
used for the selection of menu on which cursor is located. And you can convert the
channel into the channel intended to operate PTZ camera by using Camera Select
button located on the front side of ELiSS LD-1600.
① The menu of screen setup with PTZ camera is lit
with yellow light in ‘PAN/TILT’ menu of first column.
This enables the user know that cursor is located. If
setup is not done with PTZ camera, yellow light is
not lit in the first column of menu, and cursor does
not move also.
② ▲/▼ button among Direction Movement buttons located on the front side of
ELiSS LD-1600 is used for the move of cursor among the menus.
③ If you move cursor to desired menu and press ENTER button, concerned menu is
selected.
LeadTech
１１６
④ When desired menu is selected, remaining menus
change to black color. Selected menu can be
controlled by using Direction Movement button
located on the front side of ELiSS LD-1600.