User manual

Linux DVR System
13.2. Method of Parallel Port Setup
Enter to parallel port setup screen selecting parallel port setup from initial screen of
SETUP MODE.
※ Check if the cable is well connected to parallel port of ELiSS LD-1600 before the
setup of parallel port.
① Move cursor to parallel port desired to set up among 8 parallel ports. ▲ / ▼
button among Direction Movement buttons is used for the move of cursor. Yellow
light is lit in the menu where cursor is located.
② When pressing ▶ button among Direction Movement buttons, yellow light is lit on
the rim of setup window which shows present setup value, and ON/OFF can be
setup. ▲ / ▼ button among Direction Movement buttons is used for the
change of ON/OFF.
③ Upon completion of parallel port setup, when ENTER button is pressed, setup
value is stored and yellow light on the rim of setup window is turned off.
④ 8 parallel ports can be set up in the above methods.
LeadTech
１１４