User manual

Linux DVR System
11.5. Setup of Recording (Camera)
This is the menu to set up camera which assume storage when the event happened to
concerned sensor. Basic setting coincides between the sensor No. and the No. of
camera to assume storage.
① Move the cursor to storage time among sensor menu. ▲/▼button is used for
tthe movement of cursor. ▲button moves cursor to upper side and ▼button
moves cursor to lower side. Yellow light is lit on the position where cursor is
located.
② When ▶button among Direction Movement buttons is pressed, yellow light is lit
on the rim of setup window which shows present setup value on the right side of
concerned menu,
③ To designate the camera to assume storage when the event happened to sensor,
▲/▼button is used. When storage camera is selected, the color of icon becomes
dark and when cancelled, the color becomes light. ◀/▶button is used for the
move of cursor.
④ Upon completion of all setup, move cursor to menu selection window by
pressing ENTER button. Then, yellow light around the rim of setup window goes
out.
LeadTech
１０５