User Manual

gain is less than the set value of TRANS(N->D), cameras will switch to color.

5). Color control: when D/NSetting set as off, cameras keep color always, outside light is not

adequ

ate during night time, it will cause color noise, adjust color control to decrease the color noise.

5. CVBS

When CVBS_Out open, cameras support analogue BNC ou

tput, the default is CLOSED.

6. IrisDrvieMode

1).when IrisMode off, Iris open max always. When IrisMode

on, Iris will work after the priority of

shutter.

2).Voltage: Voltage is different for different iris

. The recommended value is 128 ± 8 micro. If the

voltage is too low, image will be dark even flashing while too high, image will be overexposure

3) IrisSpeed: the speed of iris change,

when image flash and it is no use by adjusting voltage, adjust

the IrisSpeed, the recommended speed value is Speed2.

7. WhiteBalance

eLineTechnology.com