Manualshelf

Instruction Manual

ManualsBrandseLine Technology ManualsCamcordersSIP-MVD-R
11121314151617181920
19 20
Configuration
4. If your computer has Flash Player ins
t
a
ll
ed,
the main screen
for the
camera web interface
opens.
From here you can view and configure the
ca
m
e
ra
.
NOTE:
The ActiveX
plug-in
may
provide smoother
video
performance than
Flash Player.
To
use
ActiveX,
click the
message above
the
video
window.
Then
click inside the
video area,
select
Install
this Add-on for
all
users
on
this computer
,
and follow the prompts.
Install
ActiveX
plug-in
NOTE:
If your computer
does
not
have
Flash Player ins
t
a
ll
ed,
you will be
prompted
t
o
select if
y
o
u would like
t
o
use Activ
eX
or Flash
Play
er
t
o
connect
to the
ca
m
e
ra:
•
Click
to
play
live
video
with
ActiveX control
to
reduce
latency
(recommended):
Uses
an
ActiveX
plug-in to connect to the camera. To
install the plug-in, click on the
video
area,
and
select Install
this
Add-on
for all
users on this computer
,
and follow the prompts.
•
Click
to
download
the latest
version
of
Flash
Player to
play
live video:
Opens
a link to download Flash Player from
Adobe’s
website.
After
completing the installation, restart your browser and reconnect to the
camera.
Select
ActiveX
or Flash Player
Configuration
3. Under
Download unsigned ActiveX controls
,
click Prompt
(recommended) or Enable.
Select Enable or Prompt under
Download
unsigned
ActiveX
controls
Click
OK
4. Click
OK
.
Click
OK
again to
save
changes.
Step
2 of 2:
Log into
camera:
1.
Connect
the camera to your
l
o
c
a
l
network and find the camera’s
IP
address.
See
“4. Finding the Camera’s IP Address” on
page 9.
2. Enter the camera’s IP address in the address bar in the
f
o
ll
owing
f
o
rmat:
http://
http://192.168.0.120:80
IP address
Colon
HTTP
port number
NOTE:
You
can also connect to the camera using a
DDNS
address (DDNS
setup and port forwarding required; see “5. Configuring Remote
Connection” on
page
12
for
det
a
ils).
3. Under User Name and
Password
,
enter the camera’s User
Name
(default:
admin
)
and Password (default:
admin
)
and click Login.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
eLineTechnology.com