Instruction Manual
7 8
Finding the Address
4. Click on a camera IP address in
Device
List to
l
o
gin.
5. Under
User Name
,
enter the user name
for
the camera (default: admin).
Under
Password
,
enter the password
for
the camera (default: admin).
Click Continue.
Enter Camera User Name
(default: admin)
Enter Camera Password
(default: admin)
Click Continue to login
6.
The
camera appears under the camera IP address. Click and drag the
camera to the display grid to open
it.
Click and drag the
camera to the display
grid to open
it
NOTE:
For detailed instructions on using
NVMS,
see the NVMS
manual on the CD.
4.2
Finding
the
Camera’s
IP
Address using UPnP
in
Windows®
7
NOTE:
To use
this method, your
router
must support
UPnP and
the
c
a
mer
a
and
computer must
be
on
the
same
network.
UPnP
is enabl
ed
in
the
c
a
mer
a
by
default,
and c
a
n
be
enabled/disabl
ed
using
NVMS (check
the NVMS
manual
for details).
Finding the Address
4.
FINDING THE CAMERA’S
IP ADDRESS
Use
the steps below to find the camera’s IP address and connect to the
camera over the local area network
(LAN)
using
NVMS, UPnP
on
Windows® 7, or Bonjour® in Mac OS®.
4.1
Finding
the
Camera’s
IP
Address Using
NVMS
1. Install
NVMS
from the
CD. Now
Doubl
e-click
the
NVMS
icon
(
) on the
Desktop.
The
l
o
g
in screen
appears.
2. Under User Name and
Password
,
enter the default
NVMS
user name
(
admin
)
and password
(
admin
).
Click Login.
Enter Admin
Enter Admin
Click Login
3.
NVMS
opens and scans the
l
o
c
a
l
network
for
connected
c
a
mer
as.
Detected camera IP addresses on the LAN appear in the
Device
List on
the
left
side of the screen with a icon.
Found
camera
IP address
eLineTechnology