Instruction Manual
41 42
Configuration
number of
days
and enter the
Number
of
Days
desired. Note that you
must
have
sufficient storage
space
to
save
the number of
days
ent
er
ed.
8. Click
OK
to
save
changes.
NOTE:
T
o vie
w
video
from the SD/micr
oSD
c
a
r
d
, FTP,
or
NAS,
use
NVMS’s
playback
features,
see
the
NVMS
manual on the
CD
for
details.
You
can
access video saved
to
FTP
or
NAS by
manually
accessing
your
FTP serv
er
or
NAS
device.
6.10
Privacy
Masking
Privacy area
The Privacy
Masking menu allows
you
to create up to
5 privacy areas
that
will
not appear in recordings.
You
can cover up to
8%
of the total image area.
To configure privacy
areas:
1. Click
Privacy
Masking.
2.
Check
Enable Privacy
Masking.
3. Click and drag inside the
video
area to configure privacy areas. Privacy
areas will be shown as green rectangles. Right-click to delete the las
t
created area.
Configuration
The
Record Policy menu allows you to set the
microSD/SD
memory card,
NAS, and FTP
recording parameters.
Once
configured, the
device can
record
video
directly to a
microSD/SD
card,
NAS,
and FTP.
To enable recording
to microSD/NAS/FTP:
1. Click
Local
Record>Record Policy.
2. Configure recording storage
l
o
c
a
tions in the
Record
Directory sub-menu.
See
“6.9.1 Record Directory” on page 34.
NOTE:
The
camera will simultaneously record to all storage
l
o
c
a
tions
that
have
been enabled in Record
Dir
ectory
.
3.
To
enable scheduled or continuous recording, check
Enable
under
Schedule
Record. Select 7*24 H
Record
to record
video
continuously at
all times, or, select
Schedule Record
to create a schedule
for
r
e
c
o
r
d
ing.
•
If you select
Schedule Record,
click
Schedule
and configure recording
times.
The
schedule is
divided
into 3 periods,
and
the camera will record
during all selected times in all 3 periods. Click
OK
when finished
configuring the recording schedule.
4.
To
enable Motion Alarm Recording, check
Enable
under Alarm Record.
Configure
P
r
e
-
re
co
rd
i
n
g
and
P
os
t
-r
ec
or
ding
times.
Check
Motion
Alarm, Channel.
5. Under Stream, select the stream to use for recording. Stream1 is
r
e
c
o
mmended if you want to record high quality
video,
stream2 is
r
e
c
o
mmended if you want to
save
bandwidth or storage space.
6.
Check
Record Audio
to enable audio
r
e
c
o
r
d
ing.
7. Under
Storage Rule
,
select
Cycle
Write to enable the camera
t
o
overwrite the oldest recorded data once the available
space
in the
storage
l
o
c
a
tion is filled. Or, select
Save Days
to
save video
for
a set
eLineTechnology