Manualshelf

Instruction Manual

ManualsBrandseLine Technology ManualsCamcordersSIP-FB
11121314151617181920
27 28
Configuration
You can
set the
camera’s date and
time the
following
ways:
•
Using an
NTP
server (recommended)
•
Using your computer’s system
time
•
Manually
The
camera is configured to use
NTP
by default, but you
must set the time
zone
and Daylight
Savings
Time settings
to ensure accurate time. After a power failure, the camera
is configured to
connect
to
an NTP
server
and
automatically
update the time when power is restored. If using another
method to set the camera clock, time must be manually
updated after a power
failure.
To
set the
camera’s date and
time
using an NTP
server:
1. Click
Device
Configuration>Date & Time.
2. Under
Time Zone
,
select your time zone.
3. If your region
observes
daylight
savings
time, check
Adjust clock
for
daylight saving
changes.
•
Under Start and
End
,
select the start and end times for daylight savings.
4. Next to Current
PC
Time, click Apply.
To sync
the
camera’s date and
time to
your computer’s system
time:
1. Click
Device
Configuration>Date & Time.
2. Un-check
Enable NTP
and click
Apply
at the bottom of the
scr
een.
3. Under
Time Zone
,
select your time zone.
4. If your region
observes
daylight
savings
time, check
Adjust clock
for
daylight saving
changes.
•
Under Start and
End
,
select the start and end times for daylight savings.
5. Click
Apply
next to Current Computer Time.
The
Current
Device
Time
updates.
To
set the
camera’s date and
time manually:
1. Click
Device
Configuration>Date & Time.
2. Under
Time Zone
,
select your time zone.
Configuration
6.7.3 Camera
The
Camera
page (
Device
Configuration>Camera
)
allows you to configure
the
Channel
Name, which appears on the camera
OSD
and the
video
system
frequency.
To change
the
Channel
Name:
•
Configure the
Channel Name
as
needed
and then click the Set button
next to Channel Name.
To change
the
video system
frequency:
•
Select the desired setting under
Video System
and then click the
Set
button next to Source Resolution.
6.7.4 Date & Time
The
Date & Time
page
allows you to configure the camera’s date and
time.
eLineTechnology