Instruction Manual

19 20
Configuration
6.4 Web Interface/Live Video Overview
Camera
configuration
menus
Click and drag to zoom in. Right-click and
select
ZoomOut to zoom out.
Double-click inside window for
full-screen
Select Stream
TIP: Select stream2 for better performance for remote
connections. Stream2 has a lower resolution than stream1.
The Live video page appears when you log into the camera. Live video
requires an ActiveX® plug-in or
Adobe Flash Player.
6.4.1 Live Video Menu
You can right-click on the live video area to bring up the Live Video Menu.
Right-click on the video area to
open the Live
Video Menu
Configuration
4. If your computer has Flash Player ins t a ll ed, the main screen for the
camera web interface opens. From here you can view and configure the
ca m e ra .
NOTE: The ActiveX plug-in may provide smoother video performance than
Flash Player.
To use ActiveX, click the message above the video window.
Then click inside the video area, select Install this Add-on for all users on
this computer , and follow the prompts.
Install ActiveX plug-in
NOTE: If your computer does not have Flash Player ins t a ll ed, you will be
prompted
t o select if y o u would like t o use Activ eX or Flash Play er t o connect
to the ca m e ra:
• Click to play live video with ActiveX control to reduce latency
(recommended): Uses an ActiveX plug-in to connect to the camera. To
install the plug-in, click on the
video area, and select Install this Add-on
for all
users on this computer , and follow the prompts.
• Click to download the latest version of Flash Player to play live video:
Opens a link to download Flash Player from Adobe’s website. After
completing the installation, restart your browser and reconnect to the
camera.
Select ActiveX or Flash Player
eLineTechnology