Instruction Manual
17 18
Configuration
3. Under
Download unsigned ActiveX controls
,
click Prompt
(recommended) or Enable.
Select Enable or Prompt under
Download
unsigned
ActiveX
controls
Click
OK
4. Click
OK
.
Click
OK
again to
save
changes.
Step
2 of 2:
Log into
camera:
1.
Connect
the camera to your
l
o
c
a
l
network and find the camera’s
IP
address.
See
“4. Finding the Camera’s IP Address” on
page 7.
2. Enter the camera’s IP address in the address bar in the
f
o
ll
owing
f
o
rmat:
http://
http://192.168.0.120:80
IP address
Colon
HTTP
port number
NOTE:
You
can also connect to the camera using a
DDNS
address (DDNS
setup and port forwarding required; see “5. Configuring Remote
Connection” on
page
10
for
det
a
ils).
3. Under User Name and
Password
,
enter the camera’s User
Name
(default:
admin
)
and Password (default:
admin
)
and click Login.
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
Configuration
4.
The
main screen
for
the camera web interface
opens.
From here you can
view and configure the
c
a
mer
a.
NOTE:
If
you
do not
see video
from the camera, make sure your
c
o
mputer
has the latest
v
e
r
s
ion of
Adobe
Flash Player ins
t
a
ll
ed
(visit
http://
www.adobe.com/ to download the latest version). After installing Flash
Player, restart your browser and reconnect to the camera.
6.3 Internet Explorer® Setup
Step
1 of 2:
Change
Internet
Explorer security settings
for ActiveX®:
1.
Open
Internet Explorer and open the Security tab.
•
Internet Explorer 8: Click
Tools
>
Internet
Options
and select the
Security
tab.
•
Internet
Explorer 9:
Click
>
Internet
Options
and
select the Security
tab.
2. Click
Custom
Level.
Click Custom level
eLineTechnology