Instruction Manual
13 14
Configuring Connection
5.1
Connecting
to a
DDNS address using
NVMS
NOTE:
Complete all the steps
above
before performing the
f
o
ll
owing
method.
1.
Open NVMS
and click
Device
Manager>Video
Device
Manager.
2. Click
Manager
. The Device Maintenance
window opens.
Enter the
camera’s
DDNS
address
Control
Port
Click Add Click Save
3. Under
Device
IP, enter the
Domain
Name from the confirmation email.
For example, enter
mycamera
.dyndns,org
.
4. Under
Control
Port, enter the camera’s control port (default: 30001).
5.
(Optional)
Under
Device Name
,
enter a name
for
the
c
a
mer
a.
6. Click
Add
to add the camera to the
Device
Lis
t.
7. Click
Save
to
save changes.
Click OK.
Configuring Connection
Step
5 of 6:
Enable DDNS on
the camera:
1. Ent
er the camera’s IP address in your web browser. Log in and then
click
Network
Servic
e>DDNS
.
2.
Check
Enable
DDNS.
3. Configure the
f
o
ll
owing:
•
Provider:
Select the ddns service you use..
•
Domain Name:
Enter the
Domain
Name you received from the
confirmation email you received after you created your
DDNS
account
(e.g.
mycamera.dyndns.org
).
•
User Name:
Enter the
User
Name
.
•
Password:
Enter the account name
Password
4. Click
OK
to
save
settings.
Step
6 of 6:
Connect
to the
camera’s DDNS
address:
1. Enter the camera’s
DDNS
address in your web browser in the
f
o
ll
owing
fo
r
m
a
t
:
http://
http://
mycamera.dyndns.org
:
80
Colon
DDNS
address
HTTP
port number
2. Under User Name and
Password
,
enter the camera’s User Name
(default:
admin
)
and Password (default:
admin
)
and click
Login
.
Once
you
have
logged into your system using your
DDNS
address, you can
connect to the IP camera from a remote location using a web browser,
NVMS
.
eLineTechnology