Owner's manual

-36--35-
CAMERA ADJUSTMENT CAMERA ADJUSTMENT
OTHERS
WHITE BAL ATW
WDR
DNR
DAY/NIGHT AUTO
PRIVACY
MOTION DET
OTHERS
All functions outside the normal settings required are all withing the special menu
OTHERS
LANGUAGE ENGLISH
LENS AUTO
SYNC INT
CAM TITLE OFF
WPC
VERSION
CAMERA RESET
RETURN
LENS MANUAL / AUTO
AUTO IRIS
TYPE DC
MODE AUTO
SPEED
064
RETURN
MODE: AUTO,OPEN,CLOSE
Sets the type of control to be use over a mechanical iris.
SPEED: 000-255
Sets the convergence speed of the mechanical iris.
CAM TITLE OFF / ON
Camera title can be shown as name on the screen as chosen.
CAMERA TITLE SETUP
CAMERA
ABCDEFGHIJKLMNOPQRSTUV
WXYZ0123456789-!#$%&’
()_`.:;<=>@^*./^*X+/
CHR1 CHR2
 CLR POS
RETURN
Use Up/Down/Left/Right to move around. CHR1/2 changes the selection fonts to
alternative selection, CLR will clear info. POS allows position change.
WPC
WPC
PLEASE COVER THE LENSENTER PW
RETURN
This allows for white pixel compensation, to correct for CCD defects or dead pixel.
Lens cap should be put to generate a black video signal for function to work.
Permit no light to enter the sensor, respectively, the Up,Down, left, right, middle
button to start the highlight of compensation. Prompts are nished, press the
middle button to exit.
RS485
Select ID on RS485 bus for camera, not tted on all camera types with Efo-P.