Manual

iVMS-2000 User Manual
76
Figure 6-7 Add Single IP
[Add IP Range]
Select “Add IP Range” as Figure 6-8, and input start/end IP address, port number,
user name and password. Click [Get Camera Info] to get on-line/off-line status of this IP
camera (the status will be displayed on the IP camera list). And if the camera has already
been added into the system, then it will not be displayed on the list.
There is a checkbox [Show online only] to enable/disable listing of off-line cameras.
Figure 6-8 Add IP Range
6.3.2 Modify Camera Info
Select a camera and click [Modify] or double click on the camera. A Camera Config dialog
box will prompt as Figure 6-9. Users can modify the camera parameters.