Manual

iVMS-2000 User Manual
27
3.5.2 Full Screen Mode
: Click the button to enter full screen mode, the button appears after clicked.
Click the button again to exit full screen mode.
3.5.3 Stop All Cameras’ in Live Preview
: Click the button to close all active windows.
3.5.4 Enable Manual Record on All Cameras
: Start Manual Recording for all cameras which will not stop until the button is
pressed again. The button looks like this when recording is in progress.
3.5.5 Start Auto Switch
: Click the button to start auto switching by cameras or groups. Select switch mode
by pressing .
Switch by cameras: Start auto switching by cameras according to current live preview
layout. Switching duration can be set in 6.1 General Setting.
Switch by groups: See 3.3.2 Cycle live preview of group. This provides the same
functionality as cycle live preview of group.
The button looks like this when switching is active. Press the button again to exit.
3.5.6 Enable/Disable Live Audio
: Press the button to enable live audio. When pressed the button should change to
;
: After enabling live audio, you can adjust volume by using the slider.
3.6 PTZ Control
Press on in main console to open PTZ control
panel as shown in Figure 3-20.