User Manual

DVR Restore Guide

this time,the lights in front panel will always blink.If don ’ t blink,means you had

lose you hand at some time.You need restore again.

7. After one minute, loose

loose

loose n

n the

the

the front

front

front panel

panel

panel button

button

button .The DVR will reboot by

itself.

8.Then wait about 1 5 minutes. The DVR is restoring.

9.After that,if DVR restart with Hangbang logo,restoring is finish.

If DVR don ’ t have image,please disconnect the DVR power supply and

re-connect the power supply. Boot it up again.Then you will see the Hanbang

logo,restore finished.

10. If your DVR shows Chinese language after restored,please switch it to

English by this menu:

主菜单

基本设置

语言

->English.

11.Then please upgrade your DVR to latest firmware version and latest

browser web control version.

1 2 .If any questions about it,please contact our technical support engineer.