Specifications

Studio
– 28 –
Radio Remote System
EL-SKYPORT - MODULES
ELSKYPORT TRANSMITTER SPEED
The ELS Transmitter Speed enables the triggering
of units attached via a Universal Skyport module,
all units with built-in Skyport and all Elinchrom units
to which a Transceiver RX is attached.
The additional control of power settings and modelling
lamp on/o can be achieved on all Elinchrom units
with built-in Skyport RX (D-Lite RX One, D-Lite RX 2/4,
BRX 250/500 and Ranger Quadra Hybrid) and on all
Elinchrom units, which require the Transceiver RX
(Digital RX 1200/2400, Ranger RX/Speed/Speed AS
and Style RX 300/600/1200).
– +/- buttons to change fl ash
power settings and modelling
lamp on/o .
– Test button for manual fl ash
trigger.
– Switch selection for 8 di erent
Frequency Channels.
– Switch selection for 4 di erent
Groups.
– All switch to control all units of
Group 1 to 4.
– LED status for sync mode and
RX Flash Units with built-in
Receiver, Transceiver RX and
Unversal Receiver.
(no modelling lamp and fl ash
power control)
FEATURES
EL-Skyport Transmitter
Speed
N° 19350
battery level status.
– Long life Lithium battery to
provide over 30000 fl ashes.
– Integrated hot-shoe with
screw lock.
– Super small. Only 4 x 5 cm.
– Ultra lightweight. Only 36 g
including the battery !
EL-Skyport Transmitter Speed
N° 19350
Set flash power up and down
Switch the modelling lamp on/off
4 Groups / 8 Frequency channels for
workplaces and multi studio operations.
Camera