Specifications

– 26 –
Radio Remote System
EL-SKYPORT - REMOTE CONTROL SYSTEM
ELSKYPORT SYSTEM
The EL-Skyport system allows the photographer to
break free from sync cords and unreliable IR systems.
Many improvements have been done to the EL-Skyport
system since its launch.
Various levels of function and control are available
depending on the units you have : The Universal
receiver module can trigger cameras via optional
shutter release cables and is compatible with all
Elinchrom classic units, most speedlights and most
of other fl ash brands for triggering.
Units with the built-in Skyport such as D-lite RX One,
D-Lite RX 2/4, BRX 250/500 and Ranger Quadra
Hybrid can be triggered and have the additional
option of power settings and modelling lamp on/o .
The Style RX series, the Digital RX series and the
Ranger RX series all require the Transceiver RX module
to be triggered whereas the control of power settings
and modelling on/o are also available. On these units,
the SPEED sync mode can be activated via the
EL-Skyport Software 3.0.
EL-Skyport Transmitter Speed
N° 19350
RX Remote Control Features
LEGEND
RX Remote Control
The continuous lines are showing controllable RX
features. The available RX features are depending
on the EL-Skyport module, the flash unit type and
the Firmware version.
Universal Receiver Speed
The dashed lines are showing the general basic
features of the Universal Receiver Speed.
RX Remote Control Points
The Transmitter Speed, EL-Skyport computer software
and the application for mobile devices can operate
and control features and functions of RX flash units,
by using the optional USB RX and WiFi modules.
RX Communication Nodes
Are showing the EL-Skyport modules, which enable
communication between RX flash units and remote
control points such as computers or mobile devices.
FEATURES
DISTANCE RANGE
Indoors Range
Up to 60 m in Normal sync mode.
Up to 40 m in Speed sync mode.
– Flash Triggering
– Flash power
up/down settings
– Modelling Lamp
on/o
– Groups / Frequency Channels
Select 4 working groups 8 frequency
channels to separate working areas.
– Normal or Speed sync mode
Additional Features with EL-Skyport
Computer Software
– Photocell
on/o
– Eye-Cell
Pre-fl ash management
– Ready Sound on/o
Ready fl ash confi rmation
– Slow Recharging
– Auto O
For Quadra & Ranger, to save battery power
– Head Socket Selection
for power packs
– Stand By
– Proportional Modelling Lamp Setup
– Photo Job
the Virtual Studio Management simulates,
saves and restores studio lighting setups.
Unit settings can be applied automatically.
– Flash Delay
programmable
– Flash Sync Sequence
programmable for up to 20 fl ash units per
second
– Flash Counter
registers the total number of fl ashes the unit
ever made, useful for rental and service.
– Temperature Display
indicates the internal temperature of the
fl ash unit.
– Firmware Update option for RX units.
– On/O Counter
useful information for rental and service.
RX Remote Control Features
From any of the three RX Remote
Control Points, following features
are available :
Available programmable features
depend on the RX fl ash unit and
Firmware.
Additional Features with WiFi
Module & Mobile Application
Outdoors Range
Up to 120 m in Normal sync mode.
Up to 70 m in Speed sync mode.