Specifications
– 8 –
Compacts
ENTRY PROFESSIONAL
– Take full control of your units
settings with the EL-Skyport App
via the optional WiFi module for
iPod Touch ®/iPad ®/iPhone ® !
– Additional features can be
found when used with the
EL-Skyport Software and the
USB Transceiver RX such as
Flash-Delay for strobing-e ects.
– Firmware update option.
– Updated electronics for even
better performance than
before !
The BRX compact fl ash units are a further
evolution of the features and quality that are
Elinchrom. They are the “EL-500”’s of the
digital era.
The concept is simple : control, power, speed
and versatility. With many programmable
features and the EL-Skyport remote system,
the BRX enables photographers the greatest
freedom to express their individuality. The
BRX series deliver the quality of performance
needed for a modern workfl ow.
Available in either 250 Ws or 500 Ws, they are
perfect for portraiture, landscape, product and
architectural photography.
WHAT’S NEW FEATURES
– Built-in EL-Skyport receiver for
triggering.
– EL-Skyport with 8 Frequency
Channels with 4 Groups.
– EL-Skyport Speed Sync mode
for synchronization up to a
1/320 s on enabled SLR
cameras.
– Pre-fl ash detector system to
enable the use of BRX with
speedlights.
– Visual Flash Confi rmation
option. The modelling lamp
comes on to confi rm the fl ash
has been triggered.
BRX
Handle with support for spare fuses
Modelling lamp up & down buttons and
scroll /program buttons for advanced features setup
Digital multi display and charge / discharge indicator
Modelling lamp on/o -free-prop – programmable
Power up & down buttons and
scroll /program buttons for advanced features setup
Mains inlet socket includes the mains fuse (slow blow)
Tilt head with extra umbrella fi tting
Modelling lamp fuse
Eye-Cell on/o -programmable
Charge Ready Beep on/o – programmable
Eye-Cell receptor
Open fl ash / Test button
Synch socket / 3.5 mm jack / low 5V sync voltage
Mains on/o switch
Centred umbrella tube for EL Umbrellas 7 mm diameter
Standard stand socket 5/8 inch
Knurled clamp screw
– Proportional, maximum,
minimum and independent
adjustment of the modelling
lamp.
– Variable f-stop steps : 1/1, ½,
4/10, 1/3, 2/10 or 1/10 steps
are available.
– Programmable ready beep
function.
– Power Auto-dump.
– Automatic temperature
controlled ventilation.
– Action fl ashtube for sharper
images.
– Multi-voltage auto-detection :
90-270 V (excluding modelling
lamp).
– 5V sync socket for maximum
protection of digital cameras.
– High impact resistant body
shell.
– Accessory bayonet allowing
the complete range of light
modifi ers.
– Rubberised handgrip with
built-in fuse storage.
CONTROL PANEL
BRX 250 — 250 Ws — N° 20440.1 BRX 500 — 500 Ws — N° 20441.1
EL-Skyport
Compatible
See p. 26










